1050 H 28 1500 x 3000 Mirror Anodized Aluminium Alloy Sheet For for Home Decoration
Product Description
1100 aluminum alloy is general industrial pure aluminum with 99.0% aluminum content. Can not be strengthened by heat treatment; the strength is low, but it has good ductility. Formability, weldability and corrosion resistance; after anodizing, it can further improve its corrosion resistance and at the same time obtain a beautiful surface.
After anodizing, the surface of the aluminum can produce a few microns-hundreds of microns of oxide film. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decorative properties have been significantly improved and improved. In fact, the direct current sulfuric acid anodic oxidation method is the most common application, because it is suitable for aluminum and most Anodizing of aluminum alloy; thicker film, hard and wear-resistant, better corrosion resistance after sealing; film colorless and transparent, strong adsorption capacity, easy to color; lower processing voltage, less power consumption ; The treatment process does not need to change the voltage cycle, which is conducive to continuous production and practical operation automation
Chemical Composition
| ALLOY | CHEMICAL COMPOSITION (%) | | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al | | 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | | | | 0.1 | | | 0.05 | 0.15 | rest | | 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | __ | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | | 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | __ | __ | 0.25 | 0.1 | __ | 0.05 | 0.15 | rest | | 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | __ | 0.4 | 0.1 | __ | 0.05 | 0.15 | rest | | 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | __ | 0.1 | __ | __ | 0.05 | 0.15 | rest | | 5A06 | ≤0.40 | 0.000～0.400 | ≤0.10 | 0.50～0.8 | 5.8～6.8 | __ | 0.0001～0.005 | ≤0.20 | 0.02～0.10 | __ | 0.05 | 0.1 | rest | | 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | | 5050 | 0.4 | 0.7 | 0.2 | 0.1 | 1.1-1.8 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | | 5154 | 0.25 | 0.4 | 0.1 | 0.1 | 3.1-3.9 | 0.15-0.35 | | 0.25 | 0.2 | | 0.05 | 0.15 | rest | | 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | __ | 0.2 | 0.15 | __ | 0.05 | 0.15 | rest | | 5454 | 0.25 | 0.4 | 0.1 | 0.5-1.0 | 2.4-3.0 | 0.05-0.2 | | 0.25 | 0.2 | | 0.05 | 0.15 | rest | | 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | | 0.25 | 0.1 | | 0.05 | 0.15 | rest | | 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | _ | 0.25 | 0.15 | __ | 0.05 | 0.15 | rest | | 5086 | 0.4 | 0.5 | 0.1 | 0.2-0.7 | 3.5-4.5 | 0.05-0.25 | | 0.25 | 0.15 | | 0.05 | 0.15 | rest | | 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.05 | | 0.15 | 0.1 | | 0.05 | 0.15 | rest | | 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | __ | 0.25 | 0.15 | __ | 0.05 | 0.15 | rest | | 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | __ | 0.1 | 0.1 | __ | 0.05 | 0.15 | rest | | |
Mechanical properties:
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min |
| 1O5OA | 0 | >0. 20—0.50 | 60-100 | | 15 |
| >0,50 — 1,50 | 20 |
| >0.8-1.5 | 20 | 25 |
| >1.5-6.0 | 28 |
| | >6. 00—50, 00 | 30 |
| H12 | >0.20 — 0. 50 | 80-120 | | 2 |
| >0.50 — 1.50 | 65 | 4 |
| >1. 50 — 3.00 | 5 |
| >3.00 — 6.00 | 7 |
| H22 | >0. 20 — 0. 50 | 80 | | 4 |
| >0. 50—1. 50 | 65 | 5 |
| >1. 50 — 3. 00 | 6 |
| | >3. 00 — 6. 00 | 11 |
| H14 | >0. 20 — 0.50 | 95-130 | | 2 |
| >0. 50 — 1. 50 | 75 | 3 |
| >1.50 — 3.00 | 4 |
| >3.00 — 6. 00 | 5 |
| H24 | >0. 20—G. 50 | 95 | | 3 |
| >0. 50—1.50 | 75 | 4 |
| >1.50 — 3.00 | 5 |
| >3.00—6. 00 | 8 |
| H16 | >0.20 — 0. 50 | 120-150 | 85 | 1 |
| >0, 50 — 1.50 | 2 |
| >1. 50 — 4. 00 | 3 |
| H26 | >0.20 — 0. 50 | 120 | | 2 |
| >0, 50 — 1.50 | | 3 |
| >1. 50 — 4. 00 | 85 | 4 |
| H18 | >0. 20—0.50 | 130 | | 1 |
| >0. 50 — 1. 50 | 2 |
| >1. 50 — 3. 00 | 3 |
| H112 | >4. 50— 12. 50 | 85 | 45 | 10 |
| >12,50—75,00 | 80 | 45 | 10 |
| Specification |
| Alloy | Temper | Thickness/mm |
| 1050,1060,1070, 1100,3003,5005 | H12,H14,H16,H18 ,H24 | >0.20~3.00 |
| 5052 | H12,H22,H24,H32,H34 |
| 6061,6063 | T5,T6 |
| Aluminium Material Grade |
| 1)1000series aluminium /Pure Aluminum/Pure Aluminium:1050,1060,1070,1080,1100,1350,etc |
| 2)2000series aluminium alloy/Hard Aluminum/Hard Aluminium/Aluminum-Copper Alloy/ Aluminium-Copper Alloy:2011,2014,2017,2024,etc |
| 3)3000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium/ Aluminum-Manganese Alloy:3002,3003,3104,3204,3030,etc |
| 4)5000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium /Aluminum-Magnesium Alloy:5005,5025,5052,5040,5054,5056,5083,5152,etc |
| 5)6000series aluminium alloy / Aluminum-Magnesium-Silicon Alloy /Aluminium-Magnesium-Silicon Alloy /:6101,6003,6061,6063,6020,6201,6262,6082,etc |
| 6)7000series aluminium alloy/ Aluminum-Zinc Alloy/ Aluminium-Zinc Alloy:7003,7005,7050,7075,etc |
| 7)8000series aluminium alloy:8011,etc |
Product Photo
Company Introduction
We are manufacturer of Aluminium products with well-equipped,experienced work team.Our company is equipped with international advanced aluminum production lines. We also Hot-continous Rolling Mill, Saw Cutting ,Extrusion Machine ,High Speed Slitting Machine Unit ,Small Precision Slitting Machine Unit ,2750mm Width Crosscutting Machine ,1400mm Width Crosscutting Machine, Small Crosscutting Machine ,Embossing Machine ,Aluminum Foil Slitting Machine,Annealing Furnace, and so on.
Chongqing Dongchong Aluminum Co,.Ltd.established in 2002 and have been in aluminium indurstry for more than 17 years.After more than ten years of rapid development, it now has more than 100 employees, more than 15,000 square meters of standard factory buildings and more than 2,000 square meters of office area.
| Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd |
| 1650mm Slitting machine | Uncoil(MM) | Finished size(MM) | Slitting Width(MM) |
| ID | OD | Width | Thickness | ID | OD | Above 0.5mm≥ 20mm |
| Φ 400 | ≤ 1800 | ≤ 1600 | 0.5-4.5 | Φ 400 | ≤ 1700(normal) |
| Φ 500 | Φ500(normal) |
| Φ 600 |
| Aluminum foil Slitting machine | Uncoil(mm) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 76 | ≤ 550 | ≤ 1200 | 0.08-0.12 | Φ76Φ76 | ≤ 550(normal) | |
| 1450mm Crosscutting machine | Uncoil(MM) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 505 |
|
Product Tags:
|
|
1500 X 3000mm Mirror Anodized 1050 H28 Aluminum Alloy Sheet Images
|
