Three Bars 2mm 5083 H114 Aluminium Checkered Sheet For Transportation Equipment
Production Description
5083 aluminum alloy is a high magnesium alloy with good strength, corrosion resistance and machinability in non-heat-treatable Alloy. After anodizing, the surface is beautiful. Arc Welding performance is good. The main element of 5083 alloy is magnesium, which has good corrosion resistance, weldability and medium strength. Excellent corrosion resistance makes 5083 alloy widely used in marine applications such as ships, as well as automobile, aircraft welding parts, subway light rail, pressure vessels (such as liquid tankers, refrigerated vehicles, refrigerated containers) , refrigeration units, television towers, drilling equipment, transportation equipment, missile parts, armor, etc. .
The 5000 series of aluminium alloys represent 5052, 5005, 5083 and 5A05 series. The 5000 series aluminium bar belongs to the more commonly used alloy aluminium plate series, the main element is magnesium, the content of magnesium is between 3-5%. It can also be called Al-Mg alloy. Its main characteristics are low density, high tensile strength, high elongation and good fatigue strength, but it can not be strengthened by heat treatment. In the same area, the weight of Al-Mg alloy is lower than that of other series. It is also widely used in conventional industry. In our country, 5000 series aluminium sheet belongs to one of the more mature aluminium sheet series.
| ALLOY | CHEMICAL COMPOSITION (%) |
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | __ | 0.1 | __ | __ | 0.05 | 0.15 | rest |
| 5A06 | ≤0.40 | 0.000～0.400 | ≤0.10 | 0.50～0.8 | 5.8～6.8 | __ | 0.0001～0.005 | ≤0.20 | 0.02～0.10 | __ | 0.05 | 0.1 | rest |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest |
| 5050 | 0.4 | 0.7 | 0.2 | 0.1 | 1.1-1.8 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest |
| 5154 | 0.25 | 0.4 | 0.1 | 0.1 | 3.1-3.9 | 0.15-0.35 | | 0.25 | 0.2 | | 0.05 | 0.15 | rest |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | __ | 0.2 | 0.15 | __ | 0.05 | 0.15 | rest |
| 5454 | 0.25 | 0.4 | 0.1 | 0.5-1.0 | 2.4-3.0 | 0.05-0.2 | | 0.25 | 0.2 | | 0.05 | 0.15 | rest |
| 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | | 0.25 | 0.1 | | 0.05 | 0.15 | rest |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | _ | 0.25 | 0.15 | __ | 0.05 | 0.15 | rest |
| 5086 | 0.4 | 0.5 | 0.1 | 0.2-0.7 | 3.5-4.5 | 0.05-0.25 | | 0.25 | 0.15 | | 0.05 | 0.15 | rest |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.05 | | 0.15 | 0.1 | | 0.05 | 0.15 | rest |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | __ | 0.25 | 0.15 | __ | 0.05 | 0.15 | rest |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | __ | 0.1 | 0.1 | __ | 0.05 | 0.15 | rest |
Aluminum Checker Sheet Advantages
1. Accurate size, good anti-slip effect,wide range of applications .
2. Strong plasticity, easy forming and excellent processing performance.
3. Embossed aluminum sheet can form a dense and strong oxide film on aluminum surface to prevent the intrusion of oxygen, so it has good corrosion resistance.
4. Good elongation and tensile strength, fully able to meet the normal processing requirements (stamping, stretching), high formability.
5. The surface quality of aluminum checker plate is good, no oil spots, waves, scratches, roller marks, neat trimming, no burrs.
6.The advantages of tread plate are slip resistant, corrosion resistant, hygienic, protective and attractive.
7.Tread plate can be found in parking lots, garages, stairways, step ladders, elevators, loading docks, warehouses, distribution centers, hospitals, factories, ships, floating docks, refrigerator trucks, walk-in freezers, elevators, walkways, handicapped access ramps, truck tool boxes, trailers, and much more.
| Diamond Aluminium Plate |
| Alloy | 1050/1060/1100/3003/5754/5083/6061/6063/6060/6082/8011 |
| Temper | H14,H18,H24,H32 ,H112, H114, T4,T6 ,T651,O |
| Thickness (mm) | 0.4mm to 7 mm |
| Width (mm) | Up to 1800mm |
| Length (mm) | Up to 6000mm |
| Standard | GB/T3880-2012 |
| MOQ | 5ton |
| Application | 1)Decorated inside and outside the car /building frame, windows, doors, ceiling, decorating panel and curtain wall |
| 2)Household appliances: refrigerators, microwave ovens, audio equipment, etc. |
Technical Property
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min |
| 5083 | H111 O | >0.20 — 0. 50 | 275-350 | 125 | 11 |
| >0. 50—1.50 | 12 |
| >1.50 — 3.00 | 13 |
| >3.00 — 6.3 | 15 |
| 6.3 — 12. 50 | 270-345 | 115 | 16 |
| >12. 50 — 50.00 | — |
| >50. 00 — 80. 00 | — |
| H12 | >0. 20 — 0. 50 | 315 — 375 | 250 | 3 |
| >0. 50 — 1. 50 | 4 |
| >1,50 — 3.00 | 5 |
| >3. 00 — 6. 00 | 6 |
| I-I14 | >0. 20 — 0. 50 | 340 — 400 | 280 | 2 |
| >0, 50—1.50 | 3 |
| >1.50 — 3,00 | 3 |
| >3.00 — 6.00 | 3 |
| H16 | >0.20 — 0. 50 | 360—420 | 300 | 1 |
| >0. 50 — 1.50 | 2 |
| >1.50 — 3.00 | 2 |
| >3.00—4.00 | 2 |
| H22 H32 | >0. 20 — 0. 50 | 305 — 380 | 215 | 5 |
| >0. 50—1.50 | 6 |
| >1.50—3.00 | 7 |
| >3.00 — 6.00 | 8 |
| H34 H24 | >0. 20 — 0. 50 | 340—400 | 250 | 4 |
| >0. 50—1.50 | 5 |
| >1.50—3.00 | 6 |
| >3.00 — 6.00 | 7 |
| H116 H321 | >1.50—3.00 | 305 | 215 | 8 |
| >3.00 — 6.00 | 10 |
| >12. 50 — 40, 00 | 12 |
| >40. 00 — 80. 00 | — |
| | >0. 20 — 0. 50 | — |
| H36 H26 | >0. 50—1.50 | 360 — 420 | 280 | 3 |
| >1.50—3.00 | 3 |
| >3.00 — 4.0 | 3 |
| H112 | >6.00 — 12.50 | 275 | 125 | 12 |
| >12. 50 — 40, 00 | 275 | 125 | — |
| >40. 00 — 80. 00 | 270 | 115 | — |
| >40-120 | 260 | 110 | — |
Photos
Company Introduction
Established for nearly 20 years, CHONGQING DONGCHONG ALUMINUM CO.,LTD. who mainly engages in aluminum industry product research, design, sales and has two subsidiaries yet, with professional equipment, mature technology, excellent team, whose annual sales have ranked first in the southwest region of China.
We have long-term cooperation with many outstanding euterprises, whose product quality is convincing.Our company provides custom-made services, in the product accuracy far more than peers.
| Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd |
| 1650mm Slitting machine | Uncoil(MM) | Finished size(MM) | Slitting Width(MM) |
| ID | OD | Width | Thickness | ID | OD | Above 0.5mm≥ 20mm |
| Φ 400 | ≤ 1800 | ≤ 1600 | 0.5-4.5 | Φ 400 | ≤ 1700(normal) |
| Φ 500 | Φ500(normal) |
| Φ 600 |
| 650mm Slitting machine | Uncoil(MM) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 400 | ≤ 1780 | ≤ 600 | 0.1-1.5 | Φ150
Φ300
Φ400 Φ500 | ≤ 1700(normal) | 6-600 |
| Φ 500 |
| Aluminum foil Slitting machine | Uncoil(mm) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 76 | ≤ 550 | ≤ 1200 | 0.08-0.12 | Φ76Φ76 | ≤ 550(normal) | |
| 1450mm Crosscutting machine | Uncoil(MM) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 505 | ≤ 1780 | ≤ 600 | 0.1-1.5 | Φ150
Φ300
Φ400 Φ500 | ≤ 1700(normal) | 6-600 |
| Φ 605 |
| 2750mm Crosscutting Machine | Uncoil(MM) | Stacking height (mm) |
|
Product Tags:
|
|
Three Bars 2mm H114 5083 Aluminium Checker Plate Images
|
